How to judge whether the CNC Plate Rolling Machine is operating normally?

CNC Plate Rolling Machine is widely used in energy, transportation, petroleum, chemical, boiler, shipbuilding, hydropower, metal structure and other industries. It can roll conical, round and arc-shaped workpieces.

CNC Plate Rolling Machine main features:

1. The working capacity of the CNC Plate Rolling Machine is the four main parameters of the thickness of the large coil (pre-bending thickness), the width of the coil, the diameter of the small coil when the material and specifications of the coil are rolled, and the four parameters change mutually during work. The conversion is the conversion relationship of the working capacity of the machine.

2. CNC Plate Rolling Machine can roll tapered workpieces. When rolling a tapered workpiece, due to the large force on the single end, the ability to roll the tapered workpiece is required to be 60% of the equipment capacity, and the rolling taper is generally not more than 30°. However, as the plate thickness decreases, the equipment load decreases, and the taper can be increased accordingly.

3. The two lower rollers are large in diameter and have sufficient strength, so the equipment does not need to increase the supporting roller device, which can effectively reduce the failure rate of the equipment.

How to judge whether the CNC Plate Rolling Machine is operating normally?

         We found that many customers get started quickly when using the CNC Plate Rolling Machine, but once there is a problem, they are at a loss and don’t know what to do. If we can understand or even master some common sense about the normal operation of the CNC Plate Rolling Machine, it will be easy Help us solve this problem. How to judge whether the CNC Plate Rolling Machine is normal?

　　 First turn on the CNC plate rolling machine, and listen to the noise pressure level of the CNC plate rolling machine at no more than 90dB. When gear transmission, electrical and hydraulic components are working, there should be no irregular impact sound and periodic screaming sound.

　　 Try the mechanical transmission system to operate normally, smoothly, without abnormal noise, and the braking is sensitive and reliable. Check the hydraulic components and pipelines for no leakage.During the operation of the CNC Plate Rolling Machine, when the hydraulic system of the CNC Plate Rolling Machine is working, the oil temperature in the fuel tank should not exceed 50 degrees. After 4 hours of continuous full-load operation, the oil temperature in the fuel tank should not exceed 60 degrees. Within the working range of hydraulic transmission components, there should be no vibration crawling, stagnation and significant impact.

　　 We believe that when the operator masters the above judgment knowledge when using the CNC Plate Rolling Machine, it can not only effectively extend the service life of the CNC Plate Rolling Machine, but also enable the CNC Plate Rolling Machine to exert its maximum effect.