Attention to the use of CNC Plate Rolling machine

Attention to the use of CNC Plate Rolling machine

The structure of the mechanical three-roller symmetrical plate rolling machine is that the three-roller symmetrical plate rolling machine is driven by a turbine worm to realize the vertical lifting motion of the upper roller in the middle of the two lower rollers, and the two lower rollers for rotating motion. Torque is provided by the gear meshing of the reducer. But this machine has an obvious shortcoming that it needs to be pre-bent with other equipment.

1. Appearance design structure should be effective modeling design, unique.

2. The surface of the automatic plate rolling machine should not have the protrusions, dents and uneven surface that are not required by the sample drawing, and the contact of the plate and forged door and cover should not have uneven edges.

3. Paint requirements should comply with JB/T1829 requirements.

4. Electrical equipment route, steam pipe, air intake system and hydraulic transmission system of the external pipeline should be installed along the external contour of the automatic winding machine, there should be no friction between the two parts with relative speed.

5. After rolling, the upper roller is raised to a certain height, the balancing device will press the tail of the upper roller, and the tipping device is turned over. The rolled metal cylinder can be discharged from one end of the upper roller, so that the unloading work is completed. After unloading, the tipping device is reset and rolled again. Before rolling, the oxide slag around the unrolled parts should be cleaned to avoid damage to the surface of the work roll during operation. After welding, the workpiece should be polished at the welding place before rolling or correcting the machine. In order to prevent the occurrence of accidents, the upper and lower rollers shall not crush each other, and the gap must be greater than the thickness of the plate.

Whether it is the three roller plate rolling machine or all other models and specifications of the three roller plate rolling machine are encountered the impact of the damp problem, and the key cause of the three roller plate rolling machine is due to the error of the actual operation method at ordinary times, usually not appropriate storage, maintenance caused by.