CNC bending machine tooling safety use norms?

CNC bending machine tooling safety use norms

CNC bending machine tooling safe use can not only protect the machine, but also extend its service life. Specifically to the actual use of words, pay attention to several links: check, set, adjust, pressure, set, unload, protection. Before use, check the tooling to see if the size of the specifications meet the production requirements.

Industrial production has super high precision requirements for the tooling, it has to be closely integrated with the bending machine, while there is sufficient overlap between the two pieces of tooling. Next, it is the positioning of the tooling, debugging the machine needs to test run a little, through the test to judge the debugging results.

Safe use of bending machine tooling to do the correct position of the tooling, multiple debugging to prevent misalignment. In adjusting the position of the mold or replace the tooling to pay attention to the electricity disconnected to prevent the sudden start of the machine on personal injury. Wait for the hands off the machine before connecting the power, first with scrap material debugging, and then regular raw material tuning.

The tooling should be in the right center of the table, with fixed clips to prevent runaway. Tooling in use because of the large impulse, want to protect it to ensure that the correct position and the respective pressure. If the tooling is misaligned, the consequences are unthinkable. Before changing the size, don’t rush to disassemble, check the original die for any damage and see if the machine itself has any problems.

After the cessation of production to disassemble the bending machine tooling in a timely manner, placed in a specific location to preserve and maintain. Tooling is a consumable, over time there is bound to be wear and tear, its accuracy will be reduced, in order to ensure product quality regular maintenance and replacement of the tooling is necessary. Of course, to prolong its life, we should be careful enough when using it, the material of raw materials, production volume, working hours, etc. will affect the quality of the tooling.