The operation specification of CNC plate rolling machine and the use of plate rolling machine bearing

The operation specification of CNC plate rolling machine and the use of plate rolling machine bearing

CNC plate rolling machine is a general-purpose equipment for rolling metal plates into cylindrical, arc-shaped or other shaped workpieces. According to the principle of three-point inverted circle, using the relative position of the workpiece changes and rotational movement, to achieve continuous plastic deformation of the plate, to get a predetermined shape of the workpiece. The all-steel forming is cylindrical, and almost all of them are rolled with the plate rolling machine.

The form of movement of the plate rolling machine can be divided into the main motion and auxiliary motion. The main motion refers to the bending machine on the upper and lower rollers of the rotation, bending and other movements. The main movement to complete the processing task of the plate rolling machine. Auxiliary motion is the loading and unloading of the upper rollers, up and down movement and the flip of the inverted frame.

Standardization and safety is an important issue in the operation of the coiling machine. In the process of using the coiling machine, it is necessary to comply with the operating procedures of the coiling machine and try to reduce and eliminate the occurrence of dangerous accidents. Now let’s see how to prevent the occurrence of dangerous accidents.

When controlling the roller pitch, pay attention to the rotation of the rollers. Be sure to stop before reaching the limit position to avoid accidents.
In the process of using the rolling machine, the transmission mechanism and connections should be inspected and maintained frequently so that they are free from looseness and damage. In the bending process, there should be no slippage between the steel plate and the roller surface to prevent the roller surface from being damaged.

Rolling machine rolling process, such as the discovery of strange noise, vibration, oil leakage, impact and other phenomena, should immediately stop to check. When inspecting the hydraulic system, high pressure oil should be prevented from ejecting and injuring people. It is strictly forbidden to spread the steel plate without welding seam, and the unspread steel plate should be made directly on the machine.

When the coiling machine rotates, when more than two people work at the same time, there must be a person in charge and a clear division of labor.

When leveling or rolling, the steel plate should be placed in the middle of the working roll, and the thickness of the steel plate should be reduced when placed on one side. When the roller is rotating, it is not allowed to be close. It is not allowed to wrap clothes and hands with rollers.

In order to prevent and prevent the occurrence of accidents, the above should be noted when using the plate rolling machine.

Rolling plate machine bearing use

1. When using the roll plate machine, should use suitable and accurate installation tools, try to use special tools, try to avoid the use of fabric and short fiber.

2. Be careful when using and installing. Do not allow strong punching, hammering directly on the bearing, through the rolling body to transfer pressure.

3. Keep the rolling machine bearing and its surrounding environment clean. Even invisible dust into the bearing, it will increase the wear, vibration and noise of the bearing.

4. In order to prevent the rolling machine bearing rust, with hands directly take the bearing, should be fully rinsed hands of sweat, and coated with high-quality mineral oil after operation, especially in the rainy season and summer.

5. Rolling bearing is the precision parts of the rolling machine, the use of caution is required. Correct use can not only achieve the expected performance effect, and can extend the running time and service life of the rolling machine bearing.

The above is the analysis of the considerations for the use of the rolling machine bearings, if there are other questions, you can consult us.

Rolling machine bearing use

Rolling machine is a kind of forming machine used for continuous point bending of plates. With the function of rolling O-type, U-type and multi-stage R-type steel plate. We pay more attention to the use of bearings in the use of bearings. Today, we will talk about the use of rolled plate machine bearings when the precautions:

1. When using the rolled plate machine, you should use suitable and accurate installation tools, try to use special tools, and try to avoid the use of fabric and short fibers.

2. Be careful when using and installing. Do not allow strong punching, direct hitting of the bearing with hammer, transferring pressure through the rolling body.

3. Keep the rolling machine bearing and its surrounding environment clean. Even invisible dust into the bearing, it will increase the wear, vibration and noise of the bearing.

4. In order to prevent the rolling machine bearing rust, with hands directly take the bearing, should be fully rinsed hands of sweat, and coated with high-quality mineral oil after operation, especially in the rainy season and summer.

5. Rolling bearing is the precision parts of the rolling machine, the use of caution is required. Correct use can not only achieve the expected performance effect, and can extend the running time and service life of the rolling machine bearing. The above is the points of attention to the use of rolling machine bearings.