CNC plate rolling machine daily use

CNC plate rolling machine daily use

Mechanical three-roller symmetrical type of this rolling machine structure for three-roller symmetrical type of rolling machine, through the turbo-worm drive and then realize the upper roller in the middle of the two lower rollers to do vertical lifting movement, the two lower rollers for rotary movement, through the gear mesh of the reducer to provide torque. But the machine has an obvious disadvantage is that it requires the use of other equipment for pre-bending.

1.Appearance design structure should be modeled design effective, unique.

2.Automatic plate rolling machine surface should not have the sample drawings not required protrusions, dents and unsmooth high and low, plates and forging of the door, cover joints should not have edges uneven condition.

3. Varnishing provisions should be in line with the requirements of JB/T1829.

4.Electrical equipment route, steam body piping, air intake system and hydraulic transmission system of the external piping should be along Automatic coil machine external contour installation, there should be no relative speed between the two parts to produce friction.

After the completion of the roll system, the upper roll up to a certain height, the balance device will be on the tail of the roller pressed, tipping device flip, the roll into the metal cylinder can be unloaded from the upper roller end, so far that is completed the unloading work. After the unloading work is finished, the tipping device is reset and rolled again. Before rolling, the oxidation slag around the unfolded parts should be purified to avoid damage to the surface of the working rollers during operation, and the welded workpieces should be polished before they are rolled or corrected on the machine. In order to prevent accidents, the upper and lower rollers must not be pressed against each other, and must leave a gap greater than the thickness of the plate.

Whether it is a three-roller rolling machine or all other models and specifications of three-roller rolling machine is encountered with the impact of the damp problem, and the key cause of the three-roller rolling machine damp is due to the actual operation of the usual method of error, usually no proper storage, maintenance caused by.