The adjustment of the baffle of the CNC shearing machine?

CNC shearing machine, which is a kind of shearing machine, here are some related problems:
1. What is the size of the CNC shearing machine?
The size of the CNC shearing machine is mainly related to the backgauge. Therefore, if you want to have an accurate size, then you should adjust the backgauge of the shearing machine so that it can be used. To avoid problems, and at the same time, it can also ensure the normal operation and use of the equipment to have a good use effect.

The adjustment of the baffle of the CNC shearing machine and the analysis of the cutting thickness and some other common problems of the shearing machine?

CNC Shearing Machine

2. Will the baffle of CNC shearing machine be adjusted automatically?
The adjustment of the baffle of the numerical control shearing machine is realized through the numerical control panel. Therefore, the automatic adjustment mainly depends on whether the setting on the numerical control panel is reasonable and whether the operation is in place. The general operation is to click on the data input, input the back gauge data, and then press the automatic and then press the start, in this way, the back gauge can be automatically in place.

3. If the steel plate is cut by a CNC shearing machine, is the cutting thickness related to the gap between the steel plates?
Anhui Yongya feels that if the steel plate is cut with a CNC shearing machine, the thickness of the cut is related to the gap between the steel plates. So, on this question, the answer is yes. If the steel plate gap is 1 to 3 mm, the adjustment amount is 1 to 2 mm. If it is 4 to 10 mm, the adjustment amount is 3 to 5 mm.

4. Why can’t the CNC shearing machine suddenly move back and forth during use?
This problem has a certain degree of professionalism. Therefore, the CNC shearing machine manufacturer Wuxi Tin Forging Machine Tool will analyze and explain and solve it.

When this problem occurs during the use of CNC shearing machine manufacturers, it depends on whether there is a problem with the overflow valve, and whether there is a problem with the limit device and the foot switch in the equipment. In addition, it is also possible that the oil pump is damaged. Therefore, it is necessary to check and eliminate one by one, so that the real cause can be found and the problem can be completely solved.

5. Can CNC shears and CNC punching machines be used together?
The functions of the CNC shearing machine and the CNC punching machine are completely different. Moreover, according to the introduction of the CNC shearing machine manufacturer Wuxi Xi Forging Machine Tool, the CNC shearing machine can only be used for sheet metal blanking, and cannot be used for punching and stretching operations, while the CNC punching machine can. Therefore, they can be used together without any problems.