Applicable industries of CNC plate rolling machine

Applicable industries of CNC plate rolling machine

CNC plate rolling machine is widely used in energy, transportation, petroleum, chemical, boiler, shipbuilding, hydropower, metal structure and other industries. It can roll conical, round and arc-shaped workpieces.

Main features:

1. The working capacity of the plate rolling machine is a large coil plate thickness (pre-bending thickness), coil plate width, rolled plate material and specifications when the diameter of the small coil four main parameters to determine, in the work of the four parameters change each other conversion, that is, the machine’s working capacity conversion relationship.

2. The machine can roll the conical workpiece. Rolling tapered workpiece, due to the single end of the larger force, so the requirements of the ability to roll the tapered workpiece for the equipment capacity of 60%, roll taper generally does not exceed 30 °. However, with the reduction of plate thickness and plate width, the equipment load is reduced and the taper can be increased accordingly.

3. The diameter of the two lower rollers is large and has enough strength, so the equipment does not need to increase the rollers device, which can effectively reduce the failure rate of the equipment.

How to judge whether the operation of CNC plate rolling machine is normal or not?

We found that many customers in the use of the coil machine quickly get started, but once the problem is bewildered, do not know what to do, if we can understand or even master some small knowledge about the normal operation of the coil machine can easily help us solve this problem. How to make a judgment on whether the plate rolling machine is normal?

First of all, open the plate rolling machine, listen to the plate rolling machine in the air rotation, noise pressure level shall not exceed 90dB. gear transmission, electrical, hydraulic components work, there can be no irregular impact sound and periodic screaming.

Try the mechanical transmission system is running normally, smoothly, no sound, sensitive and reliable braking. Then check the hydraulic components and pipelines must not have leakage. During the operation of the rolling machine, look at the hydraulic system of the plate rolling machine when working, the oil temperature in the oil tank shall not exceed 50 degrees in general, after 4 hours of continuous full load work, the oil temperature in the oil tank shall not exceed 60 degrees. Hydraulic drive components in the working range, should not occur vibration crawl, stagnation and significant impact phenomenon.

We believe that the operator in the use of the plate rolling machine, master the above judgment knowledge, not only can effectively extend the service life of the plate rolling machine, but also make the maximum effectiveness of the plate rolling machine.