Categories
- Our Blog (243)
- Technology Support (23)
- Tools Published (0)
Numerical control shears often encounter some problems in actual use, the following can be referred to:
1. CNC shearing machine is a shearing machine, in terms of specific terms, what does it specifically refer to? In addition, hydraulic and CNC shearing machines, for these two shearing machines, the starting point of classification is the same?
CNC shearing machine is a kind of shearing machine, if it is more specific, then it refers to a kind of machine equipment that realizes equipment action control through digital instructions. Therefore, it is based on the ordinary shearing machine, adding numerical control technology to obtain specific types.
CNC Shearing Machine
2. Are hydraulic shears and CNC shears the same?
For this question, the answer of CNC shearing machine manufacturer Yongya is:
Hydraulic and CNC shears, although these two belong to the same category as shears, there are still some differences in terms of details. In addition, hydraulic shears are considered from the working principle, while CNC shears are considered from the control principle, and their consideration angles are different.
For the explanation of the theoretical knowledge of CNC shearing machine, the above CNC shearing machine manufacturer Shenchong is specifically carried out through three parts, which are for operation details, discussion of future development trends, and answers to related questions, so that users can have a deep understanding This product of CNC shearing machine, and choose the appropriate model specifications.
3. If the CNC shearing machine fails to operate normally during use, what is the reason?
The CNC shearing machine, if it cannot operate normally during use, then, the specific reason is: the overflow valve in the CNC shearing machine has a problem, or its electrical appliances and limiters, etc. something is wrong. In addition, there may be a damaged switch or a problem with the shear cylinder. Therefore, the oil cylinder on the CNC shearing machine can be checked. If there is no problem, then it is a problem with the equipment pressure.
4. In the CNC shearing machine, what are the main controls?
CNC shearing machine, Anhui Yongya believes that it is loaded with a CNC system on the ordinary shearing machine to automatically locate and operate the equipment. Therefore, in terms of control, generally speaking, it includes the cutting step, the cutting angle, the cutting length, the knife edge gap, the front feeding operation degree, and the feeding device. You can choose according to your needs. , In order to make the product have a good use effect.