The difference between CNC bending machine and ordinary bending machine?

CNC bending machine and ordinary bending machines are made of stainless steel, ordinary steel plates and other plates;

The difference between CNC bending machine and ordinary bending machine? What are the operating steps of CNC bending machine?

CNC bending machine

The difference lies in whether there is computer control and whether it has automatic feedback.

The result of 　　 is: the processing speed, the processing precision are different, the processing efficiency is different;

Customers who buy new bending machines usually buy CNC, because the same processing of a batch of plates, ordinary machines can process them in two days, while CNC machines can handle them in half a day, and the accuracy is even higher.

What are the operating steps of Anhui Yongya CNC bending machine:

1. Strictly abide by Yongya’s machine tool safety operating procedures and wear labor protection equipment as required.

2. Before starting, you must carefully check whether the motor, switch, circuit and grounding are normal and firm, and check that the control parts and buttons of the equipment are stuck in the correct position.

3. Check the overlap and firmness of the upper and lower molds; check whether the positioning devices meet the requirements of being processed.

4. When the upper slide plate and each positioning axis are not at the origin, run the return-to-origin program.

5. After the equipment is started, it runs idling for 1-2 minutes, and the slide is full-stroke for 2-3 times. If there is any abnormal sound or malfunction, stop immediately, troubleshoot the malfunction, and work after everything is normal.

6. When working, one person should give unified command, so that the operating personnel and the feeding and suppressing personnel should cooperate closely to ensure that the cooperating personnel can send out the bending signal in a safe position.

7. The sheet must be compacted when bending, to prevent the sheet from lifting up and hurting people during bending.

8. The power supply must be cut off when adjusting the sheet metal die, and the operation should be stopped.

9. When changing the opening of the variable lower mold, no material is allowed to contact the lower mold.

10. When working, no one is allowed to stand behind the machine tool.