What are the energy-saving ways of CNC hydraulic bending machine?

In the process of transforming hydraulic numerical control hydraulic bending machine, the form of dual-circuit with power frequency and frequency conversion is generally adopted; at the same time, the influence of environmental conditions, grid voltage, load size and other factors must be considered; and the hydraulic energy-saving speed control device should be used as much as possible. The power line and the control line are routed separately, and the control line should be shielded as much as possible.

What are the energy-saving ways of CNC hydraulic bending machine? How to better master the operation skills of CNC bending machine?

CNC bending machine

After the test, it was found that the power consumption of the bending machine is mainly the power consumption of the hydraulic system oil pump, and energy saving should start here. As an important part of its production cost, only the energy consumption of the bending machine can reduce the overall cost and enhance the competitiveness of the product in the market. From this point of view, it is possible to install a variable frequency speed regulation device, which can convert AC power into DC power through rectification and filtering through the rectification link, and then convert it into AC power of different frequencies through the inverter link and output to the motor to achieve the purpose of energy saving. . Anhui Yongya believes that as the application range of the bending machine becomes wider and wider, we have to think about the next issue, which is about the energy consumption of the bending machine.

　　How to better master the operation skills of CNC bending machine:

The fascinating figure of CNC bending machine can be seen in the production of various large steel structure parts and street lamp pole production. Through the bending of thin plates, various shapes of workpieces can be produced, so how to operate the CNC bending machine? ? The following are the most practical operating techniques, hurry up and check it out!

One, turn on the power first, then turn on the switch, and then start the oil pump. This sequence must not be confused. Start operating the CNC bending machine by listening to the rotating sound of the oil pump.

Second, you need to step on the foot switch to perform bending processing. You can release your foot at any time when there is something to do, and then step on it to continue the operation. This is designed to be more humane.

Three, when choosing the bending notch, pay attention to the size. Eight times the width of the plate thickness is the most suitable.

Fourth, before operating the CNC bending machine, it is necessary to conduct a proper test to see if there is a gap between the upper die and the bottom. The gap size needs to be well controlled.