Hydraulic bending machine Operating specifications

Anhui Yongya hydraulic bending machine operating specifications are necessary and reasonable for those who have just used it to study and read. Standard operation of hydraulic press brakes can greatly extend the life of the machine, and at the same time ensure the safety of the operators.

1. The operator must read the machine manual carefully before using the bending machine, and be familiar with and master the structure, performance and adjustment methods of the bending machine.

2. In multi-person operation, you must confirm that there are no unsafe factors before you can step on the foot switch.

3. The gap between the upper and lower molds must be adjusted evenly. When working, no tools are allowed to be placed on the lower mold and the worktable, and the surface of the workpiece must not have defects such as welding scars.

4. Always keep the press brake clean. During use, you should always pay attention to the condition of each part of the press brake. If any abnormality is found, stop the machine for inspection immediately.

5. Generally, the die opening V is selected to be 8 times the plate thickness, that is, V=8S is appropriate.

6. Adjust the pressure strictly in accordance with the sheet metal bending pressure gauge.