Hydraulic Guillotine Shearing Machine rectangular blade advantages and maintenance

Hydraulic Guillotine Shearing Machine rectangular blade advantages and maintenance

What are the advantages of the rectangular blade of the hydraulic guillotine shearing machine.

1.Because the pendulum shear knife blade point work is arc-shaped movement, so only use two sides of the blade diamond-shaped blade; and the gate shear knife frame because it does a straight line perpendicular to the lower edge of the movement, the direct use of four-sided blade rectangular blade, from which the blade life increased 1 times.

2.Diamond-shaped blade shear plate is prone to plate twisting, the narrower the material cut the more serious, while the rectangular blade can avoid this defect.Cylinder life: hydraulic swing beam shearing machine used in the built-in oil cylinder half round block difficult to lubricate, and not easy to repair, while the hydraulic guillotine shearing machine engineering oil cylinder upper and lower cavity oiling without additional lubrication, thus greatly improving the service life.

Hydraulic guillotine shearing machine structure performance.

1. The second generation of hydraulic guillotine shearing machine, is the ideal replacement of  hydraulic swing beam shearing machine.

2. The frame adopts closed type integral steel plate welded structure with vibration stress relief (good accuracy retention).

3. Adopt advanced integrated hydraulic system (less fault, easy to repair), high pressure oil pipe (easy to repair, good replacement).Simple layout, good reliability and beautiful appearance.

4. Adopt three-point support rolling guide to eliminate support gap and improve shearing accuracy.

5. Electric quick adjustment of the edge gap, LCD display is accurate and convenient.

6. Shear angle hydraulic electric control infinitely adjustable: shear angle increases shear capacity increases (can be appropriate overload shear), The shear angle is reduced to speed up the shear speed (up to 8~20 strokes per minute when cutting thin plates).

7. Backstop electric, LCD digital display, point-action fine-tuning, accurate digital display .

Hydraulic guillotine shearing machine maintenance skills and common sense.

1. The new machine should be changed within one month of work, and then changed once a year, and each time the oil is changed, the oil tank should be cleaned.

2. Check the oil level of the tank every month, such as hydraulic system maintenance should also be checked after the oil level is lower than the oil window should be filled with hydraulic oil.

3. Hydraulic oil used in shearing machine is No. 46 hydraulic oil or No. 32 hydraulic oil, used according to the actual situation.

4. The filter should be replaced or thoroughly cleaned at each oil change.

5. System oil temperature should be between 35-60, not more than 70, such as too high will lead to deterioration of oil quality and accessories damage.

6. Shearing machine tools have related alarms or oil quality is not clean and other filter abnormalities, timely replacement.

Under normal circumstances Anhui Yongya hydraulic shearing machine 1mm thin plate shearing straightness accuracy can reach up to 0.03mm per meter, far better than the national standard, and other domestic hydraulic shearing machine manufacturers, and European and American brand shearing machine on par.