Hydraulic Ironworker Machine use characteristics

Hydraulic Ironworker Machine

The use characteristics of Hydraulic Ironworker Machine

The hydraulic combined Hydraulic Ironworker Machine is a kind of multi-functional equipment, which integrates a variety of all-in-one sheet metal and profile processing equipment. Due to the superior performance of the hydraulic combined punching and shearing machine, the field of use continues to increase, and the scope of use continues to expand. Therefore, it is not only widely used in steel structure processing, and storage shelves, but also widely used in high-voltage wire towers, street lights, and elevators. , And the production area of ​​civil facilities such as ventilation ducts. The punching and shearing machine is a machine with superior performance. Even if it is used for a long time in the production work, it can still maintain excellent performance, reducing the cost of maintenance; in the process of use, it is easy to operate, safe to use, and will not be wrong. Any harm caused by the environment and work;

The performance is very superior, and therefore it is widely used, favored by many consumers, and used, which has also prompted some manufacturers on the market now, and more and more manufacturers have begun to produce punching and shearing machines, resulting in punching and shearing. The types of machines are constantly increasing, including: combined punching and shearing machines, hydraulic punching and shearing machines, multi-functional hydraulic punching and shearing machines, hydraulic multi-functional combined punching and shearing machines, etc. The performance of these equipment is also very superior and has been widely used. use.

The standard operating steps of the Hydraulic Ironworker Machine should comply with the general safety operating procedures for the punching and shearing machine. You must be familiar with the structure and performance of the punching and shearing machine, strictly abide by the equipment operating procedures, and be trained and qualified before being able to operate.

Wear labor protection equipment according to regulations before operating the punching and shearing machine. Check the power supply and voltage, and the power can be sent only if they meet the requirements. The lubrication system, hydraulic system and compressed air system must be checked before operation. The oil volume, oil pressure, and air pressure must meet the requirements. It is necessary to check whether the photoelectric protection device is normal every day. If the photoelectric protection device is abnormal, it cannot be turned on. When starting the punching and shearing machine, the operator must ensure that no one is in the working range of the machine tool. For the program used for the first time, the dry run without the workpiece must be carried out first, and the workpiece can be loaded for processing after ensuring that it is correct. Before starting the hydraulic punching and shearing machine, the discharge ports of the upper and lower molds must be checked, and there must be no iron filings.

At the first time of actual operation, it is necessary to establish that the hydraulic press punching and shearing machine is a mechanical equipment with necessary risk factors. Therefore, in actual operation, everyone must strictly implement the mechanical equipment operating regulations and understand the structure and characteristics of the mechanical equipment. After passing the training, you can carry out the actual operation of the job. For the actual operation staff, they must wear protective clothing.

Before starting the application, check the machine and equipment to see if the working voltage of the switching power supply meets the regulations. There should not be many people around the CNC lathe, so that the actual operation can be started. After the application, the switching power supply should be disconnected. , And then clean up the CNC lathe and its work on the spot.