Hydraulic shearing machine classification

Dedicated Shearing Machine

Use more with other equipment to complete special purposes:

1. Cold bending forming line shearing machine: such as special shearing machine configured on production lines such as automobile longitudinal beam cold bending line, car side baffle production line, color steel plate forming line, etc.;
2. Steel structure production line shearing machine: mostly used for angle steel and H-beam automatic production lines to complete the shearing process;
3. Plate opening and leveling line shearing machine: used on the plate uncoiling and leveling line, a high-speed shearing machine designed to meet the high-speed cutting requirements of the production line. The thick plate line is mostly hydraulic high-speed shearing machine, and the thin plate line is more Equipped with pneumatic shears; high-speed line equipped with flying shears, continuous production, high efficiency.

Oblique Blade Shearing Machine

The upper and lower blades of the shearing machine form an angle. Generally, the blades are inclined, and the inclination angle is generally 1° to 6°. The shearing force of the oblique blade shears is smaller than that of the flat blade shears, so the motor power and the weight of the whole machine are greatly reduced, and the actual application is the most. Shear manufacturers often produce this type of shears.

Flat blade Shearing Machine

The shearing quality is good, the distortion is small, but the shearing force is large, and the energy consumption is large. There are more mechanical transmissions. The upper and lower blades of the shearing machine are parallel to each other, and are often used in hot-cutting of blooms and slabs in rolling mills; according to the shearing method, it can be divided into up-cutting and down-cutting.

Multi-purpose shearing machine

1. Combined punching and shearing machine: it can complete the cutting of the plate and the profile, which is mostly used in the blanking process;
2. Sheet metal bending and shearing machine: that is, two processes of shearing and bending can be completed on the same machine.