Hydraulic Swing Beam Shearing Machine Features

Hydraulic Swing Beam Shearing Machine Features

Hydraulic swing beam shearing machine cylinder is mainly composed of piston, jacket, piston rod, screw rod, etc. Then the hydraulic swing beam shearing machine in the oil change, should pay attention to the following matters.

1. Weekly check the hydraulic swing beam shearing machine hydraulic system oil tank oil level, such as hydraulic system repair should also be checked, the oil level below the oil window should be filled with hydraulic oil.

2. The oil temperature of the system should be between 35℃～60℃, not to exceed 70℃, such as too high will cause the oil quality and accessories metamorphosis damage.

3. Hydraulic swing beam shearing machine hydraulic oil used for ISOHM46 or MOBILDTE25.

In addition to the above points, it should be noted that the new hydraulic swing beam shearing machine operation 2000 hours after the oil should be changed, the future of each operation 4000 ~ 6000 hours after the oil should be changed, each oil change, should clear the oil tank.

Hydraulic swing beam shearing machine this machine tool is composed of bed, tool holder, transmission, clutch brake, pressing material, blocking material, lubrication and other parts, which is of high quality steel plate welded structure with good rigidity and high strength.

1. The machine body adopts full steel plate welded structure, vibration aging to eliminate stress or annealing and other methods to effectively eliminate stress, to ensure that the machine tool has high static and dynamic stiffness and vibration damping performance, to ensure that the machine precision can be maintained for a long time.

2. Slider (upper tool holder) is a plate welded integral structure, through the connecting rod and crankshaft drive around a fixed garden center in a certain angle range to achieve the pendulum shear movement; blade clearance adjustment for the worm gear structure, respectively, on both sides of the bed and set the scale, while having a zero limit function. Knife edge clearance adjustment can be completed within 2-3 minutes.

3. The transmission system adopts a belt drive, two gear transmission, reasonable transmission layout, easy maintenance. In the shear transmission process with shear overload protection function, to prevent overload shear workpiece damage equipment.

4. The machine structure to be compact, the main principle by the motor → flywheel → clutch / brake (friction) → gear mechanism → spindle → up and down movement of the upper knife frame composition; using traction solenoid or hydraulic push clutch, clutch, brake friction plate requires the use of reliable quality of domestic well-known products.

5. The equipment should have a strong mechanical pressure material system, pressure material force required to be large enough, shear the plate material without faltering. Pressure material system at the installation of fence-type safety guards to prevent the operator’s hand into the cutting edge parts.

6. The transmission or rotation parts have safety guards to ensure that the safety performance of the equipment work in line with national requirements.

7. Blade material to meet the following plate shear: carbon steel, 1Cr20Ni14Si2, 0Cr23Ni13, 1Cr18Ni9Ti, the blade by the flaw inspection factory.

8. Double button switch control shear operation, with point, single, continuous and other operating functions. Equipped with electrical interlocking safety guards and in line with national safety standards.

9. With infrared line device to facilitate the scribing and shearing work.

10. Equipment lubrication adopts centralized automatic control, which is composed of oil pump, distribution valve and pipeline, etc. If the lubrication part lacks oil, it will automatically alarm. Lubrication for manual multi-point dry oil pump lubrication, oil distribution can be completed by the oil distributor, lubrication performance is reliable.

11. Cam oil pump type pressing device, through the cam and pump body piston movement to achieve pressing action. In the bed (above the table) installed eight pressure material foot, its pressure material force can be adjusted according to the thickness of the shear plate, to ensure reliable pressure and shear accuracy.

12. Manual blocking device, the blocking plate can be lifted, so as to achieve longitudinal infinite length shearing.