Using Hydraulic Swing Beam Shearing Machine Precautions

The hydraulic swing beam shearing machine is a kind of hydraulic shearing machine, because the hydraulic swing beam shearing machine tool holder is arc motion shearing, and the arc cutter is technically difficult in the production process. Generally, shim irons are repaired during use, so the gap between the hydraulic swing beam shearing machine is not accurate, and the precision of the cut sheet is not good. Because of the arc movement, the blade has an acute angle, and the blade is damaged severely during use.

The advantages of hydraulic swing beam shearing machine, although this model of hydraulic shearing machine has certain shortcomings, but for different cutting requirements, we should use the appropriate type of hydraulic shearing machine to ensure the comprehensive performance and cost-effectiveness of the hydraulic shearing machine.

Pay attention to the Use of Hydraulic Swing Beam Shearing Machine:

1. It is not allowed to cut laminated sheets, trim the edges of unhedged sheets, or cut narrow sheets and short sheets that are not tightly compressed.

2. The gap between the blades should be adjusted according to the thickness of the plate, but it should not be greater than 1/30 of the plate. The knife plate should be fastened firmly and the upper and lower knife plates should be kept parallel. Manual turning should be used for inspection after adjustment to avoid accidents.

3. The cutting edge of the blade should be kept sharp. If the cutting edge becomes dull or cracked, it should be replaced in time.

4. When cutting, the pressing device should firmly press the sheet, and it is not allowed to cut under the state of not being tight.

5. For equipment with hydraulic devices, other hydraulic valves are not allowed to be adjusted privately except for throttling.

Hydraulic shearing machine blade grinding height does not need to adjust the gap. Shear blades generally only grind the height but not the thickness of the shear blade. The manufacturer does not recommend sharpening the blade thickness as a last resort. In this way, as long as we have not moved the knife holder of the hydraulic shearing machine, we can install the blade directly without adjusting the blade gap. If you move the hydraulic shearing machine to support the screw, you must adjust the blade gap from the beginning.

The quality of hydraulic shearing machine has a certain impact on the Chinese market. Only when you dare to behave can consumers truly let go of their worries. Only by ensuring that the quality of hydraulic shearing machine is continuously increased can they be successful in the market. Chaotic development, Hydraulic shearing machine is closely related to production, so the development of hydraulic shearing machine is also closely connected with you, accompanied by continuous technological transformation, not only makes the product achieve exquisite effects, but also makes it widely used Only in this way will the market become more prosperous.