What are some of the faults of the CNC shearing machine?

There will be some minor faults in the daily use of CNC shearing machine. Here are some common faults:

What are some of the faults of the CNC shearing machine?

CNC Shearing Machine

1. Can the problem of crescent bend be avoided when cutting a sheet with a shearing machine?

For the shearing of the sheet material, if the machine equipment of the shearing machine is used, then there will be a problem of crescent bending, and, from the present point of view, it is inevitable. The greater the thickness of the sheet, or The smaller the bar width, the more serious the problem. However, some measures can be taken to minimize it, such as choosing upper and lower circular blades, or holding them after being separated by the shearing material, to achieve the goal.

2. On the shearing machine, when a foot is stepped on, if the knife does not come up and there is an abnormal noise, what is the reason?

Regarding the specific cause of this failure of the shearing machine, its manufacturer, Wuxi Shenchong Machine Tool, believes that the main reason is that the upper and lower edges of the shearing machine are jammed by the material, resulting in clogging and other problems. At this time, if it is not solved in time, then the motor in the shearing machine will have a locked-rotor problem, and furthermore, it will be damaged or damaged. Therefore, we should pay attention to it and deal with it in a timely manner without delay.

3. From the perspective of Anhui Yongya CNC shears manufacturers, if the nominal pressure of hydraulic shears is 12500KN, what does it mean? In addition, how to judge the quality of hydraulic swing shears?

If the nominal pressure of the hydraulic shear is 12500KN, it means that the pressure of the shear is 125 tons. As for the hydraulic pendulum shearing machine, the judgment of its quality is mainly based on whether the equipment is operating normally, and when purchasing, it depends on the two aspects of its manufacturer and price. judgment.

4. What is the basis for adjusting the knife edge gap of the CNC shearing machine?

CNC shearing machine is a kind of shearing machine, if you want to adjust the knife edge gap, then, from a professional point of view, it should be determined and carried out according to the thickness of the material to be cut. If the material thickness is 1-3mm, then the adjustment value of the knife edge gap is 1-2mm. The material thickness is 4-10mm, then the adjustment value of the knife edge gap is 3-5mm.