What are the accessories on the hydraulic shearing machine equipment?

The hydraulic shearing machine is operated by the coordination of various parts and components, and the specific parts can be divided into the following types:

First of all, some accessories in the circuit, generally include: various buttons, indicator lights, control contacts, etc., transformers, switches, motors, and so on.

Followed by the hydraulic system accessories, generally include: oil pumps, valves of various specifications, pressure gauges and switches, level gauges, oil pipe fittings, sealing rings and so on.

Finally, there are other mechanical accessories of hydraulic shears, including: blades, bearings, tool holders, bolts of various types and specifications, gears, polished rods and so on.

The above is the classification of the accessories on the hydraulic shears. Here is a reminder to the new purchaser that when receiving the hydraulic shears, they must check whether the various accessories are complete according to the instructions, because these accessories are small, but they are indispensable. , We can use the machine faster if we find the problem in time

CNC bending machine pictures, CNC shearing machine pictures

CNC Shearing Machine

Control requirements for hydraulic shears:

According to the working characteristics of the shearing machine, the CNC shearing machine manufacturers put forward the control requirements for the control system as follows:

1. After power-on, check the shape of each working mechanism and control each working mechanism to be at the initial shearing machine location.

2. Feeding, the feeding mechanism is controlled by the control system to automatically transport the material to be cut into place.

3. Set the cutting size, use the servo motor to control the position of the stopper to ensure the accurate cutting size, but the size of the shearing machine may also be configured as a cycle change value.

4. Compression and shearing. After the length of the cut sheet material reaches the set value, the main motor will blow the presser and the cutting tool to press the sheet material first, and then cut the sheet material.

5. The operation of Anhui Yongya’s feeding truck, including automatic return after unloading.

6. ​​Cut sheet size setting, automatic counting and pre-setting of the number of sheets per car.

7. With power failure protection and power recovery output.

8. It can complete the automatic control of the processing process, reveal the processing parameters, and check the system.

9. Guarantee the accuracy of sheet metal processing, processing function and stability.

10. It has an excellent man-machine interface.

The adjustment of the baffle of the CNC shearing machine:

1, adjust the angle baffle

First put the template on the table to align the lower knife edge, adjust the angle baffle and fix it, then adjust the back baffle according to the template, and use the angle baffle and the back baffle to position at the same time during the cutting process.

2, adjust the rear baffle

Align the template support level with the lower knife edge, and then close the back baffle to the template and fix it, remove the template, and then install the sheet for cutting.

3, adjust the front baffle

Put the rear baffle close to the lower knife edge, then put the template close to the rear baffle, and fix the front baffle close to the template. Loosen the back baffle, remove the template, install the sheet material, and cut.