What is the problem with the different angles of the sheet metal processing on the CNC bending machine?

The CNC bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a working table and a clamping plate. The working table is placed on the bracket. The working table is composed of a base and a pressing plate. The base is clamped and clamped by a hinge. The boards are connected, and the base is composed of a seat shell, a coil and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the wire is energized to the coil, and the gravitational force is generated on the pressing plate after being energized, so as to realize the clamping of the thin plate between the pressing plate and the base. Due to the electromagnetic clamping, the pressing plate can be made into a variety of workpiece requirements, and the workpiece with side walls can be processed, and the operation is also very simple.

What is the problem with the different angles of the sheet metal processing on the CNC bending machine? How to adjust the size of the lower die of the liquid sheet press brake?

CNC bending machine

Cause Analysis:
1. The pressure is inconsistent or the gap between the adjustment tools is not uniform.

2. Different hydraulic strokes.

3, the middle of the lower mold is excessively worn, or the middle of the upper mold is worn and deformed, resulting in insufficient intermediate forming.

Anhui Yongya believes that the bending angle of the press brake depends on the stroke of the slider. The lower the slider, the deeper the upper knife will be, and the smaller the angle of the workpiece will be, and the higher the slider, the upper knife will be pressed. The shallower, the greater the angle of bending the workpiece.

0-120 refers to the relative position of the slider (stroke of the cylinder), you can try to adjust it to 0, where the slider is, and see the depth of the cylinder. When it is adjusted to 120, where the slider is, see the depth of the cylinder.

Different sheet metal thicknesses need to be bent on hydraulic sheet metal bending machines with different bending lower dies and V-shaped grooves.

CNC bending machine mold is a tool used by bending machine to form and process sheet metal. This tool is composed of various parts, and different molds are composed of different parts. It mainly realizes the processing of the shape of the article through the change of the physical state of the formed material. It is a tool used to make the blank into a part with a specific shape and size under the pressure of the bending machine.