What problems will occur in the use of three-roller CNC rolling machine?

What problems will occur in the use of three-roller CNC rolling machine?

Three rollers rolling machine, for its safety operating procedures, are we familiar with understanding it? The answer to this question, it is certainly not everyone can do, so there is a need to explain, so that we come to understand and master this point of knowledge.

Three rollers rolling machine, its safety operating procedures, the following will be divided into three parts to explain, specifically for.

(1) Before work
Equipment should be well lubricated, and its inspection, mainly whether the system is intact, and whether the ground wire is solid, etc..
Equipment for empty test run, the time is for 3 to 5 minutes, in order to check whether the operation of its various parts is normal.

(2) During work
The equipment should not be overloaded and used with super performance, otherwise it will damage the equipment.
The feeding operation should be carried out correctly and not in violation.
When the equipment is operated, its motor should be avoided to overheat, if there should be timely processing to solve.

(3) After work
Timely cut off the equipment power supply, equipment cleaning, etc., but also on the workplace to clean and organize, keep clean.
The straight edge coefficient of the coil machine, in simple terms, refers to the coil machine in the coil, the reference value of the size of the reserved straight edge, which mainly exists in the mechanical coil machine, the reason, mainly because this coil machine is not with the pre-bending function, so there will be this coefficient. And, its model is different, then its straight edge size is also different.

Three rolls of plate rolling machine, the upper roller bearing seat and the connection between the frame, the general is the rack guide slot and the upper roller bearing seat guide block between the gap fit, so it is better.