When using the Hydraulic Shearing Machine what need to pay attention

Hydraulic Shearing Machine use precautions introduced.

1. Sound balance during operation. Hydraulic shearing machine such as noise, should be parked to check.

2. Hydraulic shearing machine operation when the oil tank progresses temperature <60 degrees beyond when the machine is shut down to rest.

3. Start the hydraulic shearing machine machine for idling a number of cycles, to ensure that under normal conditions, try to cut different thicknesses of plate material, from thin to thick. Ensure that users know the performance of hydraulic shearing machine.

4. Test shear different plate thickness when it is necessary to adjust the different blade clearance. If you do not adjust the corresponding blade gap, it affects the durability of the blade.

5. Hydraulic shearing machine in the shearing process turn on the pressure gauge switch, investigate the oil pressure value, cut 12mm plate pressure should be less than 20MPa. this long-distance regulator No9, factory pressure adjustment 20-22MPa, the user must adhere to this rule, not to cut the super-rules of the material surface progress pressure, the formation of machine damage.

6. What is the role of some of the shearing machine gear plate CNC shearing machine, the baffle is an important part. Adjustment of it has certain principles, and we must accordingly develop a specification of how to adjust it.

We should first put the backstop against the lower cutter, then put the sample plate against the backstop, put the front stopper against the sample plate and fix it, loosen the backstop, remove the sample plate, then load the plate material and cut.

Then there is the sample plate bracket flat aligned with the lower cutter, then the backstop against the sample plate and fixed, remove the sample plate, and then load the plate material for cutting. There is also the adjustment of the corner stopper. We can first put the sample plate on the table and then align the lower cutter, adjust the corner stopper to fix, and then adjust the back stopper according to the sample plate, the cutting process while using the corner stopper and back stopper for positioning.

The baffle adjustment of high speed CNC shearing machine is very important. As long as we use high quality blades and then adjust the position of the baffle plate well, we can achieve perfect shearing.